# Design licences and a subsequent transfer of ownership

A Korean through-slab sleeve dispute illustrates the limits of an unrecorded non-exclusive licence, prior-use defences and proof of when infringing sales ended.

Source: https://www.iplexlaw.co.kr/en/blog/brunch-case-1935

HOME / NEWS & INSIGHTS NEWS & INSIGHTS Design licences and a subsequent transfer of ownership A Korean through-slab sleeve dispute illustrates the limits of an unrecorded non-exclusive licence, prior-use defences and proof of when infringing sales ended. Designs & Trademarks 2026.11.09 published IPLEX 6 min read A manufacturer had permission from a design owner to make and supply a product. Could that permission still be relied upon after the design changed hands? In judgment 2021Na1381 of 19 November 2021, the Korean Patent Court examined a supply agreement for through-slab pipe sleeves and its effect against a subsequent owner. 1. Sleeves supplied for resale The product was a sleeve used to secure vertical piping passing through a building’s floor slab, with a clamp fitted at the top. Company D, the original owner, filed the design application on 22 April 2010 and obtained registration on 20 May 2011. The transfer to the plaintiff was recorded on 23 March 2017. Top clamp assembly and reference dimensions for the through-slab sleeve D commissioned manufacturer I to make the moulds and supply the sleeves. The defendant also purchased sleeves from I for resale. The court compared two versions of the defendant’s product with the plaintiff’s registered design. 2. The features that determined the overall visual impression The registered design and both accused products shared a one-piece cylindrical body with four vertical projections extending along its sides. The projections were spaced approximately 90 degrees apart. A circular opening appeared in the centre of the top surface and at the top of each projection. Comparison of the registered design and the defendant’s products 1 and 2 The fixing brackets at the base differed: triangular in the registered design, rectangular in product 1 and rectangular with rounded corners in product 2. The registered brackets sat directly beneath the projections, whereas those of the defendant’s products lay between them. Product 1 also had a circular groove around the upper rim. The court treated the body, the side projections and the central top opening as dominant features because of their size and visibility. The relatively small lower brackets and upper groove did not materially alter the overall appearance. Both products therefore fell within the scope of protection of the registered design. 3. The permission given in December 2013 D discovered that I was using the same moulds to supply the defendant and other competitors. In November 2013, D demanded that those third-party sales stop. I responded that it would stop supplying D as well if it could no longer supply the defendant. The parties reached an undertaking on 2 December 2013. D would pay the outstanding price less KRW 16 million for the moulds, and I would own the moulds. I could continue supplying the defendant, while giving priority to subsequent orders placed by D. The court found that this undertaking authorised I to manufacture products embodying the registered design and supply them to the defendant. It amounted to a non-exclusive licence within that defined scope. Ownership of the moulds and permission to exploit the design were distinct issues. 4. Could the licence bind the new owner? Under Article 104(1) of the Korean Design Protection Act as applied by the court, recording this contractual non-exclusive licence would have made it effective against someone acquiring the design afterwards. There was no evidence that I had recorded the licence. It could therefore not be asserted against the plaintiff, whose acquisition was recorded in March 2017. The defendant argued that the plaintiff was related by marriage to D’s chief executive and had acquired the design to defeat the permission. The evidence did not establish that the plaintiff was involved in the relevant business at the time of the transfer. He had stepped down as D’s chairman around 2013, and the transfer occurred well after D and I stopped trading. The family relationship alone did not prove the alleged improper purpose. 5. The separate defence based on prior use Article 100 addressed a different source of non-exclusive rights. It covered a person who, without knowing the design covered by the application, created that design or learned it from its creator and was commercially using it, or preparing to do so, in Korea when the application was filed. The right was confined to the design and business purpose already being used or prepared. Under Article 104(2), such a statutory right could bind a later owner without recordal. The defendant maintained that I had designed and manufactured the product before the application. Even on that account, however, I’s work began with D’s commission, and I supplied the resulting drawings to D. This did not establish an independent prior-use right against D. Nor was there sufficient evidence that the registered design was actually derived from those drawings. The defendant also challenged D’s entitlement to apply. The court reasoned that, even on the defendant’s version of events, producing and delivering the commissioned drawings could be understood as transferring the right to obtain design registration to D. It rejected the invalidity argument. 6. Establishing when the original products stopped being sold The defendant said it had sold only a modified product from around January 2019, using the design later registered as No. 1007158. The court examined the time needed to make or alter moulds and carry out trial production. Some customers had received the modified product, but transaction documents did not show corresponding changes in product descriptions or prices, and wholesale disposal of the old stock was not established. Drawing of the modified product, design registration No. 1007158 The defendant admitted selling the original products from 1 January 2018 until at least 31 January 2019. On the wider evidence, the court found that products 1 and 2 continued to be sold alongside the modified version until at least 31 May 2019. The gradual reduction in production and sales of the original versions was taken into account in assessing damages. The Seoul Central District Court had allowed the claim in part on 8 April 2021 in case 2019GaHap506744. The Patent Court upheld liability for manufacturing, or obtaining and selling, products similar to the registered design and dismissed both appeals. It corrected the starting date for the relevant late-payment interest in the first-instance judgment to 31 January 2020. 7. Points to address in manufacturing and supply agreements A supply arrangement should distinguish the owner of the moulds, the owner of the design and the manufacturer authorised to use it. Identifying the products and permitted customers, and considering the recordal or further agreement required if ownership changes, helps clarify the continuing scope of supply. When a product is redesigned, retain records of mould work by size, first deliveries of the new version and treatment of the old inventory. In this dispute, the actual manufacturing and delivery chronology was central to deciding how long sales of the earlier products continued. The original figure labels and forms are preserved; the text explains the source material. Read the Korean source This article reflects the information available when it was published. Contact us to discuss your circumstances. Discuss this topic ↗ All articles Related service: Designs & trade marks ↗ Related service: IP disputes & appeals ↗ ON THIS PAGE 1. Sleeves supplied for resale 2. The features that determined the overall visual impression 3. The permission given in December 2013 4. Could the licence bind the new owner? 5. The separate defence based on prior use 6. Establishing when the original products stopped being sold 7. Points to address in manufacturing and supply agreements TALK TO IPLEX Discuss your IP questions We consider your technology and business needs together. ↗ Contact us Newer Nota’s model-compression patent: retraining a smaller layer group with cached inputs and outputs ↗ Older MADECADIN toothpaste: packaging, intent and trade mark damages ↗ Related insights Designs & Trademarks 2026.11.19 Trainer designs: why stitching and sole details changed the result A Korean invalidity dispute examined whether known shoe features could readily yield the registered design’s particular overall appearance. ↗ Read article Designs & Trademarks 2026.11.19 NO MORE PIZZA: the same words can play different roles A Korean trademark judgment distinguished a dominant brand element from supporting slogan-like wording in a composite mark. ↗ Read article Designs & Trademarks 2026.11.18 A recessed socket design: the hidden rear still matters A Korean design judgment considered the whole socket, including surfaces visible during sale but concealed after installation. ↗ Read article

- https://www.iplexlaw.co.kr/en
- https://www.iplexlaw.co.kr/en/blog/category/trademark
- https://www.iplexlaw.co.kr/ko/blog/brunch-case-1935
- https://www.iplexlaw.co.kr/en/contact
- https://www.iplexlaw.co.kr/en/blog
- https://www.iplexlaw.co.kr/en/ip-solutions/trademark#related-insights
- https://www.iplexlaw.co.kr/en/ip-solutions/disputes#related-insights
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1935#article-1935-en-0
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1935#article-1935-en-1
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1935#article-1935-en-2
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1935#article-1935-en-3
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1935#article-1935-en-4
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1935#article-1935-en-5
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1935#article-1935-en-6
- https://www.iplexlaw.co.kr/en/contact
- https://www.iplexlaw.co.kr/en/blog/nota-local-model-compression-cached-features
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1934
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1977
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1977
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1976
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1976
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1973
- https://www.iplexlaw.co.kr/en/blog/brunch-case-1973
